Re: EX-E2
Posted by:
SSsssteamer (IP Logged)
Date: November 17, 2005 08:42PM
<HTML>If you can, find another 10 hp Stanley of about your same year and take a lot of photos of his fuel, steam, and water systems. This will help you in your routing of your lines. Pay also close attention of the diameter of lines used. For a 10 hp, a 7/16" diameter line can be used for the feed lines to the water pumps, but don't use anything smaller than 3/8" diameter. You should have a free flowing, high volume gravity feed to yoiur water pumps.</HTML>