1 Steam Cars : Phorum
General Steam Car topics
wirewound boilers
Posted by: ernie (IP Logged)
Date: June 10, 2006 02:59PM
<HTML>What information is there on wire-wound boilers at high pressure?</HTML>
Re: wirewound boilers
Posted by: Rolly (IP Logged)
Date: June 11, 2006 02:45PM
<HTML>Wire winding of pressure vessels started in the early1800 I believe on reinforcing cannons.
The Stanleys used it on there boilers. The ASME code has a section in it for wire winding unfired pressure vessels, but I do not have a copy of that section.
Manufacturers still use the method today. See the second paragraph on the attached web site.
[www.flowae.com];
Rolly
The Stanleys used it on there boilers. The ASME code has a section in it for wire winding unfired pressure vessels, but I do not have a copy of that section.
Manufacturers still use the method today. See the second paragraph on the attached web site.
[www.flowae.com];
Rolly
Re: wirewound boilers
Posted by: Ben (IP Logged)
Date: June 12, 2006 12:35PM
<HTML>Hi,, Try [www.stanleymotorcarriage.com] [ hope this works],,,This site has good photos and a reasonable text ,, and there is a section on the Stanley boiler,,,,Happy hunting,,,Ben</HTML>
Re: wirewound boilers
Posted by: Ben (IP Logged)
Date: June 12, 2006 12:38PM
<HTML>Hey whatddidd I do wrong,,put in the <,,,> an it dissapeard,,,hmmm,,,,try www.stanleymotorcarriage.com ,,,,Ben
You forgot to include the protocol identifier and punctuation [http://]
I fixed it.
JW - Admin</HTML>
You forgot to include the protocol identifier and punctuation [http://]
I fixed it.
JW - Admin</HTML>
Re: wirewound boilers
Posted by: Peter Brow (IP Logged)
Date: June 13, 2006 04:47AM
<HTML>Check out Earle Eckel's Stanley Boiler Manual, available from the SACA Storeroom, [www.steamautomobile.com]
Peter
You got the url complete and correct, I just enclosed it in brackets <> which converted the text into a link
JW - Admin</HTML>
Peter
You got the url complete and correct, I just enclosed it in brackets <> which converted the text into a link
JW - Admin</HTML>
Sorry, only registered users may post in this forum.