I was wondering if anybody or knows anybody who makes or sells non-condenser water pumps. I was going to use one for the steam bicycle I am going to build.

Thanks
Robert Hopkins

I have heard that John Packard from the New England states sells non-condensing Stanley water pumps all machined and ready to use. I sell only just the unmachined castings for them. My castings are for the 10, 20, and 30 hp Stanleys from about 1909 through 1914. They usually use a 9/16" diameter pistons for the 10 hp, 5/8" diameter pistons for the 20 hp and 11/16" diameter pistons for the 30 HP Stanleys. They are used as a pair, front and rear. One pump is a mirrored image of the other. For more information on my bronze castings, send me a private message. Photos attached

Thanks for the info, but after thinking about an oil or fuel pump may be more what I'm looking for does anybody make or sell those.

I have fuel pump, water pumps and oil pumps. allen blazick

Thank You