Re: Stanley Water pump
Posted by:
SSsssteamer (IP Logged)
Date: July 30, 2009 02:24AM
I have heard that John Packard from the New England states sells non-condensing Stanley water pumps all machined and ready to use. I sell only just the unmachined castings for them. My castings are for the 10, 20, and 30 hp Stanleys from about 1909 through 1914. They usually use a 9/16" diameter pistons for the 10 hp, 5/8" diameter pistons for the 20 hp and 11/16" diameter pistons for the 30 HP Stanleys. They are used as a pair, front and rear. One pump is a mirrored image of the other. For more information on my bronze castings, send me a private message. Photos attached
Attachments:
water pump castings.JPG (175.9KB)