1 Steam Cars :  Phorum The fastest message board... ever.
General Steam Car topics 
Goto Thread: PreviousNext
Goto: Forum ListMessage ListNew TopicSearchLog In
740 pump box bolt spacings
Posted by: Marksteamnz (IP Logged)
Date: April 06, 2017 09:03AM

Is there anywhere a dimensioned drawing or XY list of the pump locating bolt holes? I am looking at securing the pumps to a hidden plate in the pump box to hopefully stop them moving around and enlarging the holes in the base timber. I have taken measurements from the existing base plank and the pump box and will use these to trial the idea on a sacrificial bit of 8mm alloy flat, but if there is already a recommended set of dimensions I would like to compare.

Re: 740 pump box bolt spacings
Posted by: SSsssteamer (IP Logged)
Date: April 09, 2017 02:38PM

In the past, I have done the same with a metal plate, but by using the pump drive arm fastened the the pump "H", then centering the pumps locating holes on the pump drive's travels on the pump pit floor.

Sorry, only registered users may post in this forum.
This forum powered by Phorum.