1 Steam Cars : Phorum
General Steam Car topics
STEAM CELL
Posted by: EARL C. LEAVEY (IP Logged)
Date: June 06, 2003 03:52PM
<HTML>LINKS:[www.enginion.com] <www.vapore.com></HTML>
Re: STEAM CELL
Posted by: EARL C. LEAVEY (IP Logged)
Date: June 06, 2003 03:54PM
<HTML>[www.vapore.com];
Re: STEAM CELL
Posted by: EARL C. LEAVEY (IP Logged)
Date: June 06, 2003 04:26PM
<HTML>VAPORE COULD BE USING POROUS CERAMICS LIKE THE OLD WICK BURNER IN MODEL BOILERS.AVAILABLE AT SMALL PARTS,INC. ON PAGE 85 OF CATALOG, DOWNLOADABLE ON WEBSITE[www.smallparts.com];
Re: STEAM CELL
Posted by: George Nutz (IP Logged)
Date: June 06, 2003 05:16PM
<HTML>Earl,
Thanks for the information and websites. I think old injuneers like myself tend to be suspicious of very new ideas and lets hope that Enginion is not a total marketing hype but a possibility. Good for you to post the Small Parts website as it is truly great, started by an old college professor that has a huge steam tugboat in Holland.
Off topic-, how hot is it down there? My househunting has not been successful and it appears around the Ocala area prices are going out of site/sight! Let me know how Leesburg is doing.
Thanks, George</HTML>
Thanks for the information and websites. I think old injuneers like myself tend to be suspicious of very new ideas and lets hope that Enginion is not a total marketing hype but a possibility. Good for you to post the Small Parts website as it is truly great, started by an old college professor that has a huge steam tugboat in Holland.
Off topic-, how hot is it down there? My househunting has not been successful and it appears around the Ocala area prices are going out of site/sight! Let me know how Leesburg is doing.
Thanks, George</HTML>
Re: STEAM CELL
Posted by: Terry Williams (IP Logged)
Date: June 06, 2003 09:18PM
<HTML>I thought those guys at engineion were in jail.</HTML>
Re: STEAM CELL
Posted by: EARL C. LEAVEY (IP Logged)
Date: June 07, 2003 01:50AM
<HTML>GEORGE, SINCE I'M NOT A STEAM TECHNOCRAT, PLEASE EXCUSE MY IMAGEERING. I THOUGHT THE ENGINION STEAM CELL COULD BE IMPORTANT TO THE DEVELOPEMENT OF A MODERN BOILER. I READ THAT HEAT LOSS WAS THE REASON FOR MOST OF THE INEFFICIENCY IN A STEAM SYSTEM ? THE VAPORE,INC. HAS A BURNER CONTROL AND COULD ADDAPT FOR A BOILER USE????? I DO NOT GET INVOLVED IN TO MUCH DISCUSSION ON TECHNOCAL ISSUES, BUT I'LL REFER LINKS I THINK CAN BE OF INTEREST TO THE STEAM GROUP. REGARDS, EARL</HTML>
Re: STEAM CELL
Posted by: EARL C. LEAVEY (IP Logged)
Date: June 07, 2003 02:28AM
<HTML>TERRY, I HAVE NO NEW NEWS ON ENGINION , BUT I HAVE READ WEB PAGES ABOUT YOUR STEAM OUTBOARD MOTOR, THATS WHAT I WANTED TO BUILD, SURPRISED AT THE STEAM PRESSURE 600- 800 LBS. , MOST STEAMBOATS ARE 150 - 200LBS. STEAM. YOU MUST BE INTERESTED IN THE WORK BY PURSUIT DYNAMICS AND THE STEAM PROPULSION DRIVE SYSTEM. I READ REFERANCE THAT THEY ARE GOING USE 40 LB STEAM? [www.pursuitdynamics.com] KEEP STEAMING, EARL</HTML>
Sorry, only registered users may post in this forum.