Re: crank case oil
Date: November 03, 2003 04:17AM
<HTML>Hi Per:
David is correct in that you want only a straight mineral gear oil lubricant. You do not want to add any animal or vegetable fats as these will emulsify and make a big mess. They will also gum up over time and coat the parts in your crankcase.
According to my data SAE140 gear oil viscosity covers a wide range of ISO VG ratings from midway between ISO320 and ISO460 to just over ISO680.
I make a Pin, Bearing & Journal Oil called PB&J460 Formula 2 that is a true ISO460 plain bearing oil that only has a Polybutene tackifier added to pure Pennsylvania Bright Stock. This is the best of gear oil base stocks and I am confident it would satisfy the old Stanley recommendations.
Be careful about so called "mineral oils" from the major lube blenders. Many of these companies no longer have high viscosity group I base oils in their blending operations. I caught Conoco selling an SAE90 multipurpose oil that is made from SAE30 Hydroclear base oil!!! The only way to go from 30 weight to 90 weight is to add additives like viscosity builders. This is no longer a straight mineral oil and you have no idea what other ingredients lurk in the additives package that contains the viscosity builders.
I am also working on a mineral/synthetic cylinder oil in the ISO680, ISO1000 and ISO1500 grades. It comes both compounded and un-compounded for condensing systems. The synthetic component is designed to eliminate carbon deposits and improve performance in high pressure, high temperature steam engines. I have had several inquiries from the steam car fraternity already.
I hope this is helpful.
Bill Petitjean</HTML>